改性剂用量对紫炭黑填充天然橡胶/顺丁橡胶并用胶性能的影响

研究改性剂（间苯二酚/六次亚甲基四胺共混物）用量对紫炭黑填充天然橡胶/顺丁橡胶并用胶性能的影响。结果表明：随着改性剂用量增大，胶料的硬度和定伸应力提高，拉伸强度、撕裂强度先下降后提高，阿克隆磨耗量先增大后减小；当改性剂/紫炭黑用量比为4%时，胶料的物理性能较好。添加改性剂可提高紫炭黑对胶料的补强作用，并在一定程度上改善胶料的热稳定性。     

聚合氯化铝铁的制备、使用及混凝机制研究

以氯化铝和氯化铁为原料制备出一系列不同铝铁物质的量比及碱化度的无机高分子混凝剂——聚合氯化铝铁（PAFC）,并应用于地表水的混凝处理过程。考察PAFC的混凝效能及产生的絮体特性,进而对其使用条件进行优化并分析混凝机制。结果表明,PAFC为多羟基桥连的铝铁聚合物,水解后发生电中和作用使胶粒脱稳,而后通过羟桥和氧桥联接产生架桥和卷扫沉淀作用,混凝效果优异。PAFC的pH适用范围较宽,但铝铁物质的量比对其水解过程影响较大,在铝铁物质的量比为7:1、碱化度为0.5、投加量为10 mg/L时,絮体的粒度及生长速度最大,此时浊度和UV₂₅₄的去除率分别达84.93%和78.52%。此外,正交实验的结果表明水力条件对PAFC的混凝效能影响显著,其最佳使用条件为：快搅时间为20 s、快搅速度为200 r/min、慢搅时间为15 min、慢搅速度为40 r/min。     

In situ characterization of LiY(WO4)2 nanotubes for electrochemical energy storage

Here, LiY(WO₄)₂ nanotubes are prepared via a feasible electrospinning technique. This new anode material shows excellent electrochemical properties. The capacity loss of LiY(WO₄)₂ nanotubes is as low as 6.9% after 156 cycles, while bulk LiY(WO₄)₂ presents the capacity loss higher than 55.0%. Even after 600 long-life cycles, the capacity loss of the nanotubes is only 9%. It can be seen that the hollow structure with a rough surface and a porous morphology contributes to the improvement of electrochemical performance. Furthermore, online X-ray diffraction (XRD) method is firstly applied to understand the lithium ions insertion/extraction mechanism of LiY(WO₄)₂ nanotubes. It can be concluded that it is an asymmetrical two-phase reaction. A phase transformation from LiY(WO₄)₂ to Li₃Y(WO₄)₂ can be obviously seen from the in situ XRD during discharge process. While Li₂Y(WO₄)₂ appears as an intermediate phase with a reverse charge reaction. In addition, in situ XRD also demonstrates that LiY(WO₄)₂ nanotubes have surprised electrochemical reversibility. All the above results indicate that LiY(WO₄)₂ nanotubes can be expected to be anode candidate for rechargeable lithium ion batteries (LIBs).     

自然时效对GT35合金组织与性能的影响

采用XRD、SEM、残余应力测试仪、维氏硬度计、测长机等手段对合金物相、微观组织、残余应力、硬度、线膨胀率进行表征,研究自然时效对GT35合金组织与性能的影响。结果表明,GT35合金在自然时效过程中,增强相TiC的形貌与粒径没有明显变化。当自然时效时间小于15天时,GT35合金的硬度、残余应力与线膨胀率逐渐增加,随后逐渐减小并趋于稳定。当自然时效超过90天后,GT35合金的组织与性能趋于稳定,其硬度、残余应力和线膨胀率分别为945.7 HV5、-184 MPa和-2.22×10^-5。     

烧结机卸料装置耐磨性改善

烧结机导料箱、单辊破碎机和卸料漏斗承载着烧结热矿的导料、破碎与输送,是烧结生产的重要组成部分。高温、重载的工况环境决定着机尾卸料装置必须具有抗磨损、耐高温的特性。针对邯钢1^#435m^2烧结机机尾关键部件耐磨工作面寿命短,更换不方便等问题,分析磨损机理与失效原因,提出改进抗磨工作面结构,升级耐磨材料,优化焊接工艺等措施。通过技术方案的实施,使烧结机导料箱、单辊破碎机和卸料漏斗等卸料装置维持了较高的抗磨损性能,达到了预期的改造效果。